Đẩy công suất 2 kênh ARF P2.12
Bộ khuếch đại công suất dòng P series là bộ khuếch đại công suất chuyên nghiệp được phát triển để theo đuổi âm thanh xuất sắc chất lượng với áp lực cao.
Dòng P có thể hoạt động ổn định ở tải 2 ohm mà âm thanh không bị biến dạng. Kết hợp với bộ điều chế PWM công nghệ cấp nguồn động lực, dòng P có thể thực hiện các yêu cầu cao về hiệu quả và chất lượng.
ARF _P Series Power Amplifier
Model: P2.12
Technical Specifications
- Number of amplifier channels 2
Max. Output Power (all channels driven): 8 ohms 1200W
- Audio Performance
THD+N (THD @ 1 kHz and 1 dB below clipping): ≤ 0.0 5%
Frequency Response: (+0 /-0.5 dB, 1/8 W into 8 ohms ) 20Hz - 20KHz
S/N: ≥95 dB
Damping Factor (8 O load, 1 kHz and below): 200
Channel separation(8 O load, 1 kHz and below): ≥70 dB
Slew Rate: 35V/uS
- Analog Input
Input Impedance (balanced/Unbalanced) 20KΩ/10KΩ
- Circuit: Output Circuit Class2H
Protection circuit Soft start, VHF, DC, short circuit, clip limit, over heat, Temperature-power control
- Gain
Input Sensitivity 0.775V/1V/32dB
Voltage gain 40.2dB
- Back panel Interface
Analog, 2-channel I/O (input + link) 3-pin XLR, electronically balanced
Output connectors SpeakON / Binding Post
Output Bridged Mode CH1+CH2: CH1 is signal input source
Cooling front-rear airflow, temperature controlled speed
Switch Stereo/Parallel/Bridge switch/Sensitivity switch/Ground switch
- Mains Power: Voltage ~220V/50Hz, .± 10%
Amplifier Dimension 480mmx380mmx67mm
Giá bán: 16.000.000 đ