Loa ARH
AR's ARH line is a passive two-frequency speaker system, which is consistent with the design concept of "AR" (Audio Reality).Voice operation its domineering, clear and detailed and full strong; The atmosphere is elegant and highly visualized, and it is in accordance with human engineering.ARH has a unique high fidelity 8-inch intermediate frequency drive and 1 1-inch titanium membrane high frequency unit.ARH 8 inch intermediate frequency drives and 1 inch titanium membrane high-frequency unit carry AR patent in Germany conjoined KARST HORN, AR patent conjoined KARST high school HORN sound solution adopts unique multi HORN and phase plug, constant curvature drive by 8 inches medium frequency unit, no sharp metal sound traditional compressed drive.ARH intermediate frequency point is near to 6.3 KHZ, avoid the traditional 1 KHZ - 2 KHZ frequency division point of phase disorder and intermediate frequency distortion, keep the most sensitive to the human ear intermediate frequency sound natural smooth and oneness. The AR patent conjoined KARST HORN and the special frequency division design increase the control of the sound directivity of the ARH line, and within a certain distance, the ARH can achieve the horizontal projection Angle of 90.ARH has extremely high sensitivity, don't need a lot of electric power can gain level output, loudly ARH suits for large and medium-sized FOH main amplification or voice monitor, can also be as AR - LINE fill near-field distribution system, more than ARH LINE matrix speakers can be vertical or horizontal merger of large matrix on the line. The audio system from the ARH line matrix is widely used in high demand mobile performance, high-end bar club, large studio, professional theater, high demand multifunctional hall and large high-end conference center.
Specifications:
- Type compact: Compact, two-way passive
- Frequency response: 120Hz-20kHz ± 3dB
- Drvers: 1x 8”(200mm)/2”(51mm) voice coil, ferrite ring magnet MF drive
- 1x25.4 mm(1 in)exit neodymium magnet compression driver
- Rated power: 200W AES,800W peak
- Recommended amplifier power: 200-800 watts /8 ohm load state
- Sensitivity: 112dB
- Maximum SPL: 138dB continuous, 144B peak
- Nominal impedance: MF=8 ohms, HF=8 ohms
- Dispersion (-6dB): 90° horizontal, 55° vertical
- Crossover: 5kHz Passive
- Enclosure: 18mm birch plywood throughout
- Finish: Polyureacoatings
- Protective grille : Black perforated steel
- Connectors: 2 x Neutrik NL4
- Pin connections: wired pin1+: positive, pin1-: negative
- Fittings: 22xM10 hoisting screw holes
- 1 x mounting pole socket
- 2xSteel handle
- Dimensions: (W) 493mm x (H) 446mm x (D) 467mm
- Weight : 23kg
